Even with a gutter filter installed, you still cannot escape the occasional necessity of clearing off of debris and small leaves that have managed to slip into your gutter. In relying solely on your filter without inspecting your gutters, you are exposing your roof to risks of clogged gutters and stagnant water.

Left alone, water will eventually seep into the other parts of the house, rot your wood and breed molds in some places. Gutters without filters are even more likely to hoard leaves and, together with the water weight, it can wreck havoc on your roof.

To avoid any costly home and roof repair, you only have to take out your sturdy ladder and trusty gloves. The gloves will protect your hands from the twigs and other objects that could injure you. If you have a gutter scoop, the job will be done faster. A pail hooked onto your ladder can hold the tools you need without you having to go up and down many times to fetch them.

After you cleared the larger trash, locate the pipe that directs the water down to the ground and point your hose towards that pipe. If the water flows smoothly, you will know that you have accomplished your task well.

Source: Elitearticledirectory.com

When the stack effect occurs inside your home or when you do normal chores like washing and cooking, moisture is carried into the attic. Air that is thick with moisture spells trouble for any home especially during winter because it will result to condensation and that will coat everything that you place inside your attic. Without you knowing, you will be breeding molds in those damp places and exposing your home to damage like warping wood or rusting metals that are caused by the excess moisture left untouched for a long time.

A simple inspection on your soffit vents is the first step to ensure that you have enough attic ventilation to counteract the moisture problem. These vents could sometimes get clogged up over time so brushing away the blockages should do the trick. If you have no ventilation at all, you can have your roof assessed as to the number and type of vents that you need. This is important because often, the flow of air will just cancel out or will create another issue. With the many types of vents available, you will also need assistance as to which of them is strong enough to suck the air out of your attic.

Source:  Ezinearticles.com

The costly effects of water damage should be enough to send every homeowner into a roof inspection frenzy, but in reality most are hard pressed to even slip in an annual checkup. In time, this negligence will result to rotten walls and molds eating up parts of the house and by that time, an inspection would be too late. By catching the culprit before it starts its menace, you can protect your health and pocketbook from the hazards of water damage.

When doing gutter repair or cleaning, you might as well check for the kind of debris collected there among the leaves and twigs. If you see bits of roofing material like asphalt, you will have an idea that your roof is starting to deteriorate and fall apart by pieces. If you have means to zoom in on your roof, you need not even go up the ladder to check on your flashings. You can stay on the ground and scour for bent or crumpled flashings so you can have them replaced before they allow any water through. You can also go up your attic and feel your insulation for any moist or damp sections because this can indicate that water has started to seep in.

Source: http://andrewalba.homepage.ph/2010/07/13/home-roof-repair-watch-for-the-signs/

While having their home undergo an eavestrough repair,  homeowners can also have their roof inspected for any leaks that have been troubling them. Finding the exact origin of the leak can get tricky but you can start with the flashing since majority of leaks start there. Because they are vulnerable to weather changes, flashings are the likely culprit, but they are also relatively easier to repair than the roof itself.

If the leak started there and you would have it changed, make sure that the new flashing will have enough give to bear the stress of roof contractions. They should also be primed and painted to protect them from the elements.

You can also work with your roofing contractor in tracing the source of the leak by recreating a rainy condition with the use of a hose. If you have a sloping roof, you can start at the lowest section where you supposed the leak could have started.

This is not a single man operation since you would need someone to stay inside the attic and direct the other person inspecting outside to the possible locations. Once you find the leak, you can then patch it yourself or have a contractor fix it.

Source: Ideas.reliableremodeler.com